Skip to content Skip to sidebar Skip to footer
Página inicial / what plug to use with minn kota mkr-21

what plug to use with minn kota mkr-21

Postar um comentário

Installation Guide for MINN KOTA models including: MKR-21, ON-BOARD CHARGER POWER PORT, 1865108

MKR-21 On-Board Charger Power Port Installation Instructions

MKR-21 On-Board Charger Power Port Installation Instructions

mkr-21 on-lath charger power port 1865108 installation tools and resources required item / assembly function # description qty. p card-warning, power port i p fastener,warning card,pwr port 1 2 basket, power port, blk *includes half dozen* one four lune, ability port, blk ane half-dozen main-plug, power port, blk *includes 2* 1 8 cover-plug, power port, blk one ten screw, ss-ability port 2

MKR-21 MKR-23 Installations Instructions

Select a location on the boat that is at least 21" away from all batteries and fuel fill lines. Note: Before drilling holes check for wires and.

PDF MKR-21 On-Board Charger Power Port Installation Instructions

  • PDF Viewer
  • Universal Certificate Viewer
  • Google Docs View
  • Google Drive View
  • Download Document [pdf]
  • Download Certificate [Optimized]
  • Document:
    • Text
    • References
Not Your Device? Search For Manuals / Datasheets:

File Info : application/pdf, 2 Pages, 228.64KB

DocumentDocument MIN productmanual MKR-21 
MKR-21 ON-BOARD CHARGER Ability PORT 1865108  Convenient adapter that allows quick thru-hull connections to an AC extension cord � with no cutting or splicing of wires required � using the AC plug from any Minn Kota charger. The splash resistant embrace and gasket prevent corrosion on the AC plug when not in use.  Particular / Assembly p p 2 4 6 8 x 12 p  Function #           Clarification  Qty.  Bill of fare-WARNING, Ability PORT  1  FASTENER,WARNING Carte du jour,PWR PORT  ane  BASKET, Power PORT, BLK *INCLUDES half dozen*  1  LUNE, POWER PORT, BLK  1  Chief-PLUG, Ability PORT, BLK *INCLUDES two* 1  Encompass-PLUG, Power PORT, BLK  i  SCREW, SS-Ability PORT  ii  SCREW, PH-OVAL, SS  3  INSERT, Brass-Power PORT  2  half dozen viii  12  10  iv  2  p Non shown on Parts Diagram.  This part is included in an assembly and cannot be ordered individually.  TOOLS AND RESOURCES REQUIRED � Drill � Pen or similar marking tool  � 1/viii" drill bit � 9/64" drill bit  � 1-7/8" hole saw � Screwdriver  INSTALLATION  1  a. Select a location on the boat that is at least 21"  1b  9/64" Mounting  1e  away from all batteries and fuel fill lines.  Screw Hole  AC Plug from Charger  Notice: Before drilling holes check for wires and supports on the surface area existence drilled. b. Drill a 1/viii" pilot hole in the eye of the selected location. c. Using the pilot pigsty, align a 1-7/8" pigsty saw to cut the mounting pigsty. d. Place the AC Power Port in the ane-7/8" hole to marking and drill holes for the 3 mounting screws.  one/8" Pilot Hole 1-7/eight" 1f  Screws  9/64" Mounting Screw Hole  Cover Plug  Basket Lune  Stainless Steel Screws  Main Plug  e. Put the Air conditioning cord through the 1-vii/viii" hole from the  inside the boat and identify the AC plug into the Air conditioning  Power Port and tighten the 2 screws (Item #10).  f. Mountain the AC Ability Port in place with the three Stainless Screws (Items #12) provided. Your new AC Ability Port is now ready for utilize.  Stainless Steel Screws  Alarm  Avoid serious injury or death from fire, explosion, or electrical shock. This device must be connected to a Ground Error Circuit Interrupt (GFCI) protected AC outlet. When using an extension cord, connect the AC charger before connecting to the GFCI protected AC outlet. Make connection in a secure manner that will avoid contact with the water. TAG ONLY TO Exist REMOVED Past CONSUMER.  1 | minnkotamotors.com  �2021 Johnson Outdoors Marine Electronics, Inc.  PORT D'ALIMENTATION DU CHARGEUR INT�GR� MKR-21 1865108  Adaptateur pratique qui permet des connexions rapides par la coque � une rallonge c.a., sans coupe ni �pissure de fils, en utilisant la fiche c.a. de due north'importe quel chargeur Minn Kota. Le couvercle r�sistant aux projections de liquide et le joint emp�chent la corrosion sur la prise c.a. lorsque le chargeur northward'est pas utilis�.  Article/ Ensemble  Due north� de pi�ce  Description  Qt�  p    CARD-WARNING, POWER PORT  1  p    FASTENER,Alarm CARD,PWR PORT  1  2    Basket, Ability PORT, BLK *COMPREND 6*  ane  4    LUNE, Ability PORT, BLK  i  half dozen    Principal-PLUG, Ability PORT, BLK *COMPREND 2*  one  8    Comprehend-PLUG, Power PORT, BLK  one  10    Screw, SS-POWER PORT  12    SCREW, PH-OVAL, SS  ii  three  12  p    INSERT, BRASS-POWER PORT  2  p Non affich� sur le sch�ma des pi�ces.  Cette pi�ce est incluse dans un ensemble et ne peut pas �tre command�eastward individuellement.  6 8  10  4  ii  OUTILS ET RESSOURCES Due north�CESSAIRES � Perceuse � Stylo ou un autre outil de marquage semblable  � M�che de one/viii po (3,17 mm) � Yard�che de 9/64 po (3,57 mm)  � Scie-cloche de 1-7/8 po (47,62 mm) � Tournevis  INSTALLATION  1  a. S�lectionnez un emplacement sur le bateau situ� � au  1b Trou de vis de montage  1e  moins 21 po (53 cm) de toutes les batteries et conduites  de 9/64 po (three,57 mm)  de remplissage de carburant.  Fiche c.a. du chargeur  AVIS : Avant de percer des trous, v�rifiez la pr�sence de fils et de supports dans la zone perc�e. b. Percez un avant-trou de 1/8 po (3,17 mm) au middle de l'emplacement s�lectionn�. c. � l'aide de l'avant-trou, alignez une scie-cloche de i 7/eight po (47,62 mm) cascade couper le trou de montage. d. Placez le port d'alimentation c.a. dans le trou de 1-7/eight po (47,62 mm) pour marquer et percer les trous cascade les three vis de montage. e. Ins�rez le cordon d'alimentation c.a. dans le trou de 1-7/8 po (47,62 mm) de l'int�rieur du bateau et placez la fiche dans le port d'alimentation c.a. et serrez les 2 vis (commodity due north� ten). f. Fixez le port d'alimentation c.a. en place avec les 3 vis en acier inoxydable (articles north� 12) fournies. Votre nouveau port d'alimentation c.a. est maintenant pr�t � �tre utilis�.  Avant-trou de 1/8 po (3,17 mm) one-7/8 po (47,62 mm)  Trou de vis de montage de 9/64 po (3,57 mm)  1f Vis en acier inoxydable  Vis Bouchon du couvercle  Panier Lunette  Fiche principale  Vis en acier inoxydable  AVERTISSEMENT  �viter les blessures graves ou la mort caus�es par un incendie, une explosion ou un choc �lectrique. Ce dispositif doit �tre branch� sur une prise c.a. prot�g�e par disjoncteur de fuite de terre (DDFT). Lorsque vous utilisez une rallonge, branchez le chargeur c.a. avant de le brancher sur la prise c.a. prot�g�e par un disjoncteur de fuite de terre. �tablissez une connexion de mani�re s�curitaire afin d'�viter tout contact avec l'eau. �TIQUETTE � RETIRER UNIQUEMENT PAR LE CONSOMMATEUR.  minnkotamotors.com Part #2377119  Minn Kota Consumer & Technical Service Johnson Outdoors Marine Electronics, Inc. PO Box 8129 Mankato, MN 56001 ECN 41934  121 Ability Drive Mankato, MN 56001 Telephone (800) 227-6433 Fax (800) 527-4464  �2021 Johnson Outdoors Marine Electronics, Inc. All rights reserved.  Rev A  06/21

References

  • minnkotamotors.com
three-Heights™ PDF Optimization Shell vi.3.1.5 (http://www -tools.com)

koehlerusave1994.blogspot.com

Source: https://manuals.plus/m/c397bbf0e65e609232e862bb1e5bc88c8f31dfb2afb20350383e918e3d6727c3

Postar um comentário for "what plug to use with minn kota mkr-21"